Coolermaster Sniper Internals
On the panel behind said grill, there’s a large 200mm fan that pulls cool air in from the outside and pushes it straight over the the CPU and GPU. There’a also a dust filter to make sure the inside doesn’t get clogged.
On the inside of the case, there’s a sheet taped in place that shows you which motherboard spacers to screw into for which board time you have. The whole interior is also black, and looks great because of it.
At the bottom is space for another fan, this one sized 120mm which would draw air in from underneath the case, and blow it across the internals.
At the front end you have plenty of toolless mechanisms, with the 5 3/4 inch drives worked very simply, by pushing the button, it clips in and out without any problems.
The HDD cages work very easily too. Pressing the button on the left, it pops open the front of it, and you slide the drive in, clip in place, and done. Simple as anything.