Creative X-Fi Fatal1ty edition

Audio

X-Fi Fatal1ty edition specs

Technical Specs
24-bit Analog-to-Digital conversion of analog inputs:96kHz sampling rate
24-bit Digital-to-Analog conversion of digital sources:96khz to analog 7.1 speaker output
24-bit Digital-to-Analog conversion of stereo digital sources:192kHz to stereo output
16-bit to 24-bit recording sampling rates:8, 11.025, 16, 22.05, 24, 32, 44.1, 48 and 96kHz
ASIO 2.0 support:16-bit/44.1kHz, 16-bit/48kHz, 24-bit/44.1kHz, 24-bit/48kHz and 24-bit/96kHz with direct monitoring
Enhanced SoundFont support:Up to 24-bit resolution
X-RAM:64MB
Audio Performance (Rated Output @ 2Vrms, Typical Value)
Signal-to-Noise Ratio (20kHz Low-pass filter, A-Weighted):Stereo Output: 109dB
Front and Rear Channels: 109dB
Center, Subwoofer and Side Channels: 109dB
Total Harmonic Distortion + Noise at 1kHz (20kHz Low-pass filter):0.004%
Frequency Response (-3dB, 24-bit/96kHz input ):<10Hz to 46kHz
Frequency Response (-3dB, 24-bit/192kHz input):<10Hz to 88kHz (Stereo only)
Connectivity
FlexiJack:3-in-1 function (Digital I/O/ Line In / Microphone) via 3.50mm mini jack
Line level out (Front / Rear / Side / Center / Subwoofer):3.50mm mini jacks
AUX_IN line-level analog input:4-pin Molex connector on card
One AD_Link (26 pin) connector:For linking to the X-Fi I/O Console (upgrade option)
I/O Drive Connectivity
Coaxial SPDIF input and output:Two RCA jacks
Auxiliary input:Two RCA jacks
Optical SPDIF input and output:Two optical connectors
MIDI input and output:Two mini MIDI female connectors
Headphone output and volume control:6.35 mm (1/4-inch) stereo jack
Shared line-level analog Line/Microphone input:6.35 mm (1/4-inch) stereo jack

Designed to meet the performance demands of the world’s best-known professional gamer, Johnathan “Fatal1ty” Wendel, the Sound Blaster X-Fi Fatal1ty™ sound card provides stunning 109dB SNR audio quality, accelerates gaming performance and includes 64MB of on-board X-RAM for high performance gaming. With support for EAX® ADVANCED HD™ 5.0, the latest version of the EAX Environmental Audio standard, the Sound Blaster X-Fi Fatal1ty card utilizes X-Fi CMSS 3D technology for stunning audio realism over headphones in LAN gaming. The Sound Blaster X-Fi Fatal1ty features a convenient front-facing internal drive bay for easy connectivity, plus the X-Fi IR remote to easily access and control all digital entertainment, and to control the X-Fi 24-bit Crystalizer, X-Fi CMSS 3D, 3DMIDI and EAX. In addition to providing outstanding gaming performance, the Sound Blaster X-Fi Fatal1ty includes all of the standard features, application software, power and performance capabilities of the Sound Blaster X-Fi Platinum and Sound Blaster X-Fi XtremeMusic.

Previous Next

Last modified: February 15, 2011

Previous Story

Audio, Peripherals

SteelSound 5H v2

The SteelSound 5H v2 is the second in the 5H line. The first was a well rounded headset, but suffered in...

Next Story

Audio, Peripherals

Icemat Siberia In:Ear Headset

Following Basshunters gratuitous product placement of Icemat’s headsets, everyone has been talking about...

One Response to :
Creative X-Fi Fatal1ty edition

  1. sam says:

    Does it have dts and dolby encodes?

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.