August 26th, 2011

Cooler Master Hyper 612S

Physical Layout

This is a giant cooler. It’s not the biggest out there, but it is very tall and very wide and very deep. Expect to have trouble mounting this if your case isn’t the biggest.

Cooler Master Hyper 612S

Click to Enlarge

The fan is 12cm in diameter with some interestingly shaped blades. These are designed to keep airflow strong as well as reducing air turbulent.

Cooler Master Hyper 612S

Click to Enlarge

This cooler features an impressive 6 copper heatpipes, or twelve if you count each side individually. They use the design that runs the heatpipes through the copper core. This is designed to increase the movement of heat from the core through the heatpipes to the fins.

Cooler Master Hyper 612S

Click to Enlarge

Speaking of which, on this cooler they are aluminium and are very finely spaced(aprox 3mm). They’re flat which won’t give quite as much surface area as curved ones, but it will help keep air turbulence to a minimum, thereby reducing noise output.

Cooler Master Hyper 612S

Click to Enlarge

The heatpipes run all the way through the fins, exiting at the top of the Hyper 612s where there’s a Cooler Master logo. The finish on the end of these pipes is very nice; in fact the whole cooler feels of very high quality. It’s built to a high standard

Cooler Master Hyper 612S

Click to Enlarge

The core is all copper and comes with the usual warning label to help protect it during transit. The surface is reasonably shiny though not perfectly reflective.

Cooler Master Hyper 612S

Click to Enlarge

Pages: 1 2 3 4 5

Coolers