in Cases

InWin Maelstrom

Externals Continued

The 5 3/4 inch drive bays have large honeycomb shaping to them which does look quite good.


Click to enlarge

The two green leprechaun green coloured handles on the front happen to have a simple message on them which seems a little odd.


Click to enlarge

Between the two non-handles, resides the InWin logo.


Click to enlarge

At the back of the Maelstrom, you get to see it was made in China, awesome. The PSU is mounted at the bottom of this case, with four water cooling tube holes just above it. This is different from most cases, as nine times out of ten those manufacturers only include two. This allows a multi loop setup to two external radiators. It would be quite a setup, but perhaps a little unnecessary. The rear fan is also visible from here, and it’s another 120mm fluorescent yellow affair.


Click to enlarge

The side of the case has a large grill covering most of it, with four yellow rings signifying the corners of a large internal 220mm fan.


Click to enlarge